Kuva: Hella Lighting Finland OyLedvalo

Standardisointi

Takaa muovituotteiden laadun ja yhteensopivuuden

Lausunnolla olevat standardit

Lausuntokierroksella olevat standardiehdotukset on luettavissa SFS:n Lausuntopyyntöpalvelussa. Lausunnot/kommentit standardeihin voit antaa SFS:n Lausuntopyyntöpalvelun kautta.

Lausuntopyyntöpalvelu

Avoimet MT:n lausuntopyynnöt

Kommentit voi lähettää myös sähköpostiin minna.annala(a)plastics.fi käyttämällä virallista CEN/ISO -kommentointilomaketta.

Kommentointilomake
Virallinen ISO/CEN lomake kommentointiin
37KB, päivitetty 16.2.2015

Kommentit standardiehdotuksiin tulee antaa englanniksi ellei kyseessä ole puhtaasti kansallinen SFS-standardi.

Kansalliset standardit


Puhtaasti kansallisia SFS-standardeja ei lausuntokierroksella.

Eurooppalaiset standardit

Lausunnolla CEN
CEN
Toimialayhteisön
hyväksymispäivämäärä
Standardi

EN ISO
vastaava ISO
OtsikkoKomitea CEN

Komitea ISO
Työ-
vaihe
Standardit,
jotka uusi
kumoaa
5.7.2017prEN ISO 13255Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints (ISO 13255:2010)CEN/TC 155
40.20 Enquiry-
5.7.2017FprCEN/TS 15223Plastics piping systems. Validated design parameters of buried thermoplastics piping systemsCEN/TC 15550.20 FVCEN/TS 15223:2008
2.8.2017FprEN ISO 11295

ISO/FDIS 11295
Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO/FDIS 11295:2017)CEN/TC 155


ISO/TC 138/SC 8
50.20 FVSFS-EN ISO 11295:2010
2.8.2017FprEN ISO 11296-2

ISO/FDIS 11296-2
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 2: Lining with continuous pipes (ISO/FDIS 11296-2:2017)CEN/TC 155


ISO/TC 138/SC 8
50.20 FV-
2.8.2017FprEN ISO 11297-2

ISO/FDIS 11297-2
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Part 2: Lining with continuous pipes (ISO/FDIS 11297-2:2017)CEN/TC 155


ISO/TC 138/SC 8
50.20 FV-
4.8.2017prEN ISO 21225-2Plastics piping systems for the trenchless replacement of underground pipeline networks. Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO/DIS 21225-2:2017)CEN/TC 15540.20 Enquiry-
4.8.2017prEN ISO 21225-1Plastics piping systems for the trenchless replacement of underground pipeline networks. Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO/DIS 21225-1:2017)CEN/TC 15540.20 Enquiry-
10.8.2017FprEN 1451-1Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Part 1: Specifications for pipes, fittings and the systemCEN/TC 15550.20 FVEN 1451-1:1998
10.8.2017EN 1329-1:2014/FprA1Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes, fittings and the systemsCEN/TC 15550.20 FV-
17.8.2017prEN ISO 13259Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2010)CEN/TC 15540.20 EnquirySFS-EN 1277:en
17.8.2017prEN ISO 19892Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling (ISO 19892:2011)CEN/TC 15540.20 EnquirySFS-EN 12295:en
17.8.2017prEN ISO 19893Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)CEN/TC 15540.20 Enquiry
SFS-EN 12293:en
17.8.2017prEN ISO 13056Plastics piping systems. Pressure systems for hot and cold water. Test method for leaktightness under vacuum (ISO 13056:2011)CEN/TC 15540.20 EnquirySFS-EN 12294:en
31.8.2017prEN 12104Resilient floor coverings. Cork floor tiles. SpecificationCEN/TC 13440.20 EnquirySFS-EN 12104:2000
31.8.2017prEN 17142Modular multilayer floor coverings. Elements with a wood powder based surface layer. Specifications, requirements and test methodsCEN/TC 13440.20 Enquiry-
31.8.2017EN ISO 15874-2:2013/prA1

ISO 15874-2:2013/DAM 1:2017
Plastics piping systems for hot and cold water installations. Polypropylene (PP). Part 2: Pipes. Amendment 1 (ISO 15874-2:2013/DAM 1:2017)CEN/TC 155


ISO/TC 138/SC 2
40.20 Enquiry-
31.8.2017EN ISO 15874-3:2013/prA1

ISO 15874-3:2013/DAM 1:2017
Plastics piping systems for hot and cold water installations. Polypropylene (PP). Part 3: Fittings. Amendment 1 (ISO 15874-3:2013/DAM 1:2017)CEN/TC 155


ISO/TC 138/SC 2
40.20 Enquiry-
31.8.2017EN ISO 15874-5:2013/prA1

ISO 15874-5:2013/DAM 1:2017
Plastics piping systems for hot and cold water installations. Polypropylene (PP). Part 5: Fitness for purpose of the system. Amendment 1 (ISO 15874-5:2013/DAM 1:2017)CEN/TC 155


ISO/TC 138/SC 2
40.20 Enquiry-
Tiedot päivitetty 27.6.2017

Kansainväliset standardit

Lausunnolla ISO
ISO
Toimialayhteisön hyväksymispäivämääräStandardi
OtsikkoKomitea ISOTyövaiheStandardit jotka uusi kumoaa
31.7.2017ISO/DIS 13259Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints ISO/TC 138/SC 140.20 DISISO 13259:2010
2.8.2017ISO/FDIS 11295Classification and information on design and applications of plastics piping systems used for renovation and replacement ISO/TC 138/SC 850.20 FDISSFS-EN ISO 11295:2010
2.8.2017ISO/FDIS 11296-2Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 2: Lining with continuous pipesISO/TC 138/SC 850.20 FDIS-
2.8.2017ISO/FDIS 11297-2Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 2: Lining with continuous pipesISO/TC 138/SC 850.20 FDIS-
7.8.2017ISO/DIS 21225-1Plastics piping systems for the trenchless replacement of underground pipeline networks -- Part 1: Replacement on the line by pipe bursting and pipe extractionISO/TC 138/SC 840.20 DIS-
7.8.2017ISO/DIS 21225-2Plastics piping systems for the trenchless replacement of underground pipeline networks -- Part 2: Replacement off the line by horizontal directional drilling and impact molingISO/TC 138/SC 840.20 DIS-
7.8.2017ISO/DIS 7432.2Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals ISO/TC 138/SC 640.20 DIS

HUOM. 2. lausuntokierros
ISO 7432:2002
31.8.2017ISO/DIS 8779Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications ISO/TC 138/SC 240.20 DISISO 8779:2010
31.8.2017ISO 15874-2:2013/DAmd 1Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: PipesISO/TC 138/SC 240.20 DIS-
31.8.2017ISO 15874-3:2013/DAmd 1Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: FittingsISO/TC 138/SC 240.20 DIS-
31.8.2017ISO 15874-5:2013/DAmd 1Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the systemISO/TC 138/SC 240.20 DIS-
Tiedot päivitetty
27.6.2017